New Products

products category

Contact us

  

Office:23# No.1 Building of Hebei Industrial Park,Longhua New District,Shenzhen,China

Tel:86-0755-23222285

Fax:86-0755-23222286

Email:sales03@bonkapower.com 

Skype:
(1)bonkapower(Rebecca)
(2)bonka.Nisa (Nisa)         
(3)bonka-allen (Allen)

What's APP : (86)15712031419

BONKA 24000mAh 12V Start Battery for Motocycle

    BONKA 24000mAh 12V Start Battery for Motocycle


    Specifications:

    1. Ambient temperature:25±3℃
    2. Charging Voltage:14.6±0.12V
    3. Cold Ambient temperature:-18℃
    4. Discharge Cut-off Voltage:6.0V
    5. Contour dimension:150*87*93mm
    6. Weight:1190g
    7. Current:400A
    8. Capcitiy:24000mAh
    9. Voltage as of shipment:13 ~ 14 V


    Operating Temperature Range:

    Discharge: -10°C~60°C
    Charge     : 0°C~45°C
    Storage    : - 20°C~40°C
     


    Life (Charge cycles, 80% depth of discharge):

    500 cycles @ 1C charge, 10C discharge rate 25°C ≥80% Cini,
    1000cycles @ 1C charge ,1C discharge rate 25°C ≥80% Cini


    Self Discharge---Batteries can be stored for 12 month at 25℃. For higher temperature the duration will be shorter.
     


    WARNING:
     
    Never attempt to open or disassemble the battery! If accidental contact with inner content of the batteries occurs, wash the affected skin area and contact a doctor for further medical assistance. 

    If the battery gives off an odor, generates heat, becomes discolored, deformed, or appears abnormal in any way, please remove it from the device or charger immediately and stop using

     


    Fitting:

    1. Check the battery voltage before fitting by pressing and holding the TEST button on the BATTERY CAPACITY INDICTOR. If indicates LOW or MED, recharge it is necessary.

    2. Fitting should be following by the instruction of the owner manual.
     
    3. Make sure the connection of both positive and negative leads correctly.
     
    4.  Mount the battery with spacer or specific stick form when needed for the best possible fitting.
     
    5. The original screw and nuts must be fixed with the battery terminal securely. Battery and even vehicle may be damaged by the sparks if any loose connection.



    Cautions:

    1. Do not immerse the battery in water or allow it to get wet.
     
    2. Do not use or store the battery near sources of fire or heater.
     
    3. Do not put the battery into a fire or apply direct heat to it!
     
    4. Do not connect the battery directly to wall outlets!
     
    5. Do not reverse the positive(red +)or negative(black -)terminals!
     
    6. Do not short-circuit the battery by connecting wires or other metal objects to the positive(red +)and negative(black -)terminals!
     
    7. Do not directly solder the battery terminals!
     
    8. Do not attempt to disassemble or modify the battery in any way!
     
    9. Do not pierce the battery casing with a nail or other sharp objects break it open with a hammer, orstep on it!
     
    10. Do not use the battery in combination with primary batteries (such as dry-cell batteries) or batteries of different capacity, type or brand!
     
    11. Do not press on indicator button longer than few seconds!
     
    12. Keep out of reach if Children and Pets!

    Prve:BONKA U2 5200mAH 75C 3S1P 11.1V Lipo battery Packs-R/C Heli Next:There is no article.
Facebook Twitter Google